Description
3d printed mount It will allow you to slide the box in & out without having to undo the screws. On one end screws need a small gap so they can allow the bracket to slide. The other end can be tight. If you want to open it - slide the bracket all the way out & lift that end of the box. After you do that you can slide the box out over that bracket. You can also slide it in exactly the same way Wood screws are not supplied with the set (you are buying 1 complete set here). These are just regular 4 mm x 25 mm wood screws (0.157 inch x 0.98 inch). The slots are 4.5 mm wide (0.177 inch) so make sure not to use too thick screws as they will just prevent it from moving These should be good for both cars & caddies (they are not car safe though). If you want these to be 100% car safe you can have the plastic vaporized in a ceramic shell & then filled with aluminum or brass ( I do not do that yet so you will have to ask someone who has a foundry ). Holder Mount For Dewalt Toughsystem
